Avaya 6424D+M Bedienungsanleitung PDF herunterladen (Seite 11)

uncorrected (UI-frame) mode connections over 56 Kbps facilities.

The data mode option setting must correspond to the capabilities administered on your ISDN

telephone line. Contact your System Administrator for information on the proper setting of this

option. For more detailed information on data mode, refer to the Mode option in the "Data Option

Definitions" section, Chapter 4.

The local mode option lets you select which form of commands and responses your ADM will

use after it is powered up. Local mode option values are CMD, AT, Enhanced AT, and Off.

Select CMD (factory setting) for the most user friendly interface with on-screen help.

Select AT if your PC communications package requires the use of an AT command set.

Select Enhanced AT only if you are using a PC communications package intended for use

with the AT&T ISDN Telephone Application Programming Interface. Enhanced AT mode

allows your PC to monitor and control all aspects of your ISDN voice and data telephone

service. For more information on Enhanced At, refer to the Integrated Services Digital

Network (ISDN) Application Programming Interface (API) Programmer’s Manual,

document number 533-705-200.

Select Off to disable the ADM from accepting commands and issuing responses through the

EIA interface. The Off mode is useful when your ADM is connected to a receive-only

device, such as a printer.

Set the speed option to the highest speed compatible with your data terminal or PC

communications package. Speed option values range from 1200 bps to 57.6 Kbps. The factory

setting is 9.6 Kbps.

Set the parity option to match the requirements of your data terminal or PC communications

package. Parity option values are odd, even, mark, or space. If your data terminal or PC

communications package does not require a particular parity, set the parity option to "space"

(factory setting).

The factory settings (default settings) may work for you. If these settings are not correct for your

particular set-up, follow the steps in the following sections to change them.

Setting Options on the 7506 or 7507 Display Sets

If you have an ISDN 7506 or 7507 set, you may find it easier to follow the instructions on the

set’s display.

Note: The handset must be in the cradle and the internal speakerphone/loudspeaker or

attached speakerphone must be off to set options from the keypad.

1 Press the

Select

button. The green lamp comes on.

Note: This button may be labeled

Shift/Select

on older sets.

2 Press the

DATA/SEND/OFF

button. No additional lamps come on.

Follow the instructions on the set’s display as described below.

3 Press

to view the options or

to change any of the options.

Getting Started 2-3

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya 6424D+M Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Telefone Avaya 6424D+M