
120 Configuring Services Settings
Enterprise Edge Networking Operations Guide P0910464 Issue 01
3. From the 1st Preferred Codecs list box select the video class.
4. Configure the 2nd through 5th preferred codec selections.
5. From the Echo Cancellation list box enable or disable echo cancellation.
6. From the Non-Linear Processing list box enable or disable non-linear
processing.
7. From the Silence Compression list box enable or disable silence
compression.
8. From the Fallback to Circuit-Switched list box to enable or disable fallback
to circuit-switched.
9. In the Voice Jitter Buffer box type the voice jitter buffer and press the Tab
key.
10. In the Fax Jitter Buffer box type the appropriate fax jitter buffer and press
the Tab key.
11. In the Local Gateway IP box type the local gateway IP address and press the
Tab key.
12. Press the Tab key save the settings.
To modify VoIP Gateway Remote Gateway Entry services:
1. On the navigation tree, click Remote Gateway.
Clicking the Remote Gateway navigation key causes the key to disappear.
You must click Remote Gateway.
The VoIP Remote Gateway screen appears.
Voice Jitter
Buffer
Lets users specify the voice jitter buffer size in the range of 20-200. The
default setting is 50.
Fax Jitter Buffer Lets users specify the FAX jitter buffer size in the range of 20-200. The
default setting is 50.
Local Gateway
IP
Lets users specify the local VoIP gateway to be used as its IP Address while
interacting with other VoIP gateways. Since the Enterprise Edge server
typically has more than one IP interfaces and more than one IP Address in it,
users must choose one that VoIP gateway uses. This address must match the
entry for this gateway in the remote gateway table of those VoIP gateways.
Ensure this address is reachable to the other gateways via IP.
Setting Definition
Kommentare zu diesen Handbüchern