Avaya Configuring DLSw Services Bedienungsanleitung PDF herunterladen (Seite 159)

DLSw Service Parameters

304233-A Rev. 00

A-19

Parameter: DLSw RFC Version

Path:

Configuration Manager > Protocols > DLSw > Advanced > Global

Default: RFC1434

Options: RFC1434 | RFC1795 | V2.0 (Unicast) | RFC2166 (Multicast)

Function: Selects the RFC implementation to run on the router: RFC 1434, RFC 1795, or

DLSw Version 2.0.

Instructions: Click on Values and select RFC 1434, RFC 1795, or V2.0. Refer to Chapter 1,

“Data Link Switching Overview” for detailed information on these RFCs.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.28

Parameter: Maximum Package Size

Path:

Configuration Manager > Protocols > DLSw > Advanced > Global

Default: 1532

Range: 0 to 2147483647

Function: Specifies the maximum amount of information (in bytes) that can reside in one

package when sending multiple DLSw frames in a single TCP frame for

transmission over a wide area network. DLSw does not split switch-to-switch

protocol (SSP) frames (SSP header and user data) among multiple packages.

Instructions: Specify a value smaller than the TCP Window Size parameter and less than or

equal to the Virtual Ring MTU size for the network, minus the size of the TCP/

IP and MAC headers. Specify 0 to disable packaging.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.23

Parameter: Packaging Timeout (msec)

Path:

Configuration Manager > Protocols > DLSw > Advanced > Global

Default: 10

Range: 0 to 2147483647

Function: Specifies the time interval (in milliseconds) to delay a package before sending it

to TCP. This value is based on the Packaging Threshold parameter. The value

should not be greater than the time it takes to send the number of outstanding

bytes before packaging begins.

Instructions: Type any positive integer in the range 0 to 2147483647.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.24

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 271 272

Keine Kommentare

Avaya Configuring DLSw Services Bedienungsanleitung Seite 159