Avaya Configuring DLSw Services Bedienungsanleitung PDF herunterladen (Seite 175)

DLSw Service Parameters

304233-A Rev. 00

A-35

Parameter: Destination (Host) MAC (hex)

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: None

Options: Any standard MSB Token Ring MAC address

Function: Identifies (with the Destination SAP) the Token Ring or Ethernet host that the

local device will reach using SDLC services. This parameter must match the

MAC address of the LAN gateway, using MSB (Token Ring) format.

Instructions: Consult your host system manager for the host MAC address; then enter the

12-digit hexadecimal address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.8

Parameter: Destination (Host) SAP (hex)

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: 0x4

Options: 0x01 to 0xFE

Function: Identifies (with the Destination MAC) the Token Ring or Ethernet host that the

local device will reach using SDLC services. This parameter must be entered

into the SAP Table of the source and destination routers. The default (04) is

included in the default SAP Table.

Instructions: Consult your host system manager for the host SAP address. Enter the 0x prefix

followed by a one-digit or two-digit hexadecimal address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.9

Parameter: MAXOUT

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: 7

Range: 1 to 127

Function: Controls the maximum number of consecutive frames that an SDLC link station

can send without acknowledgment.

Instructions: Enter a value from 1 to 127.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.10

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 271 272

Keine Kommentare

Avaya Configuring DLSw Services Bedienungsanleitung Seite 175