Avaya Configuring DLSw Services Bedienungsanleitung PDF herunterladen (Seite 171)

DLSw Service Parameters

304233-A Rev. 00

A-31

Parameter: PU Type

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: None

Options: T1.0

| T2.0 | T2.1 | T4

Function: Specifies the type of the XID-sending node. This parameter is used with the

IDBLOCK, IDNUM, and XID Format parameters to determine the station

exchange identification (XID) value. The value must match the PU type of the

SDLC-attached device. For some devices, this is a fixed value.

For example:

• IBM 5394 -- PU 1.0

• IBM 3274 -- PU 2.0

• IBM 5494 -- PU 2.1.

• IBM 3745, IBM 3720, and IBM 3725 -- PU 4

For other devices, the PU type is explicitly defined. For example, the IBM 3174

can be configured as PU 2.0 or PU 2.1.

Instructions: Choose T1.0, T2.0, T2.1, or T4.

MIB Object ID: N/A

Parameter: IDBLOCK

Path:

Configuration Manager > Protocols > DLSw > Local Devices

Default: None

Options: Any 3-digit hexadecimal value

Function: Specifies the block number, which must match the host’s IDBLOCK parameter

value that identifies incoming connection requests. This parameter is used with

the PU Type, IDNUM, and XID Format parameters to determine the station

exchange identification (XID) value. Table A-3

lists the IDBLOCK numbers.

Instructions: Obtain the configured value at the host (from VTAM or other host operating

system) for this device.

MIB Object ID: N/A

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 271 272

Keine Kommentare

Avaya Configuring DLSw Services Bedienungsanleitung Seite 171