Avaya Configuring IP, ARP, RIP, and OSPF Services Bedienungsanleitung PDF herunterladen (Seite 124)

Configuring IP, ARP, RIP, and OSPF Services

4-6

117356-E Rev 00

Selecting an Encapsulation Option for ARP and Probe

If you select ARP, Probe, or ARP/Probe, you must also select the appropriate data

link encapsulation option as follows:

• If your address-resolution scheme is ARP only, select Ethernet encapsulation,

SNAP encapsulation, or Ethernet/SNAP encapsulation.

• If your resolution scheme is HP Probe only, select LSAP encapsulation.

• If your resolution scheme is ARP/Probe, select Ethernet/LSAP encapsulation,

SNAP/LSAP encapsulation, or Ethernet/SNAP/LSAP encapsulation.

IP ignores this parameter if the underlying media is anything other than Ethernet.

By default, IP uses ARP Ethernet encapsulation. You can use Site Manager to

specify an encapsulation scheme.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Interfaces

. The IP Interface List window opens.

4. Click on the interface that you want to edit. Site Manager displays the parameter

values for that interface in the IP Interface

List window.

5. Set the

Ethernet Arp Encaps

parameter.

Click on

Help

or see the parameter

description on page A-12

6. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 361 362

Keine Kommentare

Avaya Configuring IP, ARP, RIP, and OSPF Services Bedienungsanleitung Seite 124