Avaya Configuring IP, ARP, RIP, and OSPF Services Bedienungsanleitung Seite 144

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 362
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 143
Configuring IP, ARP, RIP, and OSPF Services
5-14
117356-E Rev 00
Receiving RIP Updates on an Interface
By default, RIP listens for routing updates on every interface on which it is
enabled.
You can use the BCC or Site Manager to disable and reenable this feature as
required.
Using the BCC
To specify whether RIP listens for routing updates, navigate to a RIP interface
prompt (for example,
box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip
) and enter:
listen
<state>
state
is one of the following:
enabled
(default)
disabled
For example, the following command causes RIP to stop listening for updates on
IP interface 2.2.2.2:
rip/2.2.2.2#
listen disabled
rip/2.2.2.2#
Note:
If you enable this feature, a configured policy can still prohibit the
interface from updating its internal routing table.
Seitenansicht 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 361 362

Kommentare zu diesen Handbüchern

Keine Kommentare