Avaya Configuring IP Services Bedienungsanleitung Seite 106

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 585
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 105
Configuring IP Services
4-30 117356-A Rev. A
Disabling and Reenabling an IP Interface
When you configure an IP interface on a circuit, the interface is automatically
enabled. You can use the BCC or Site Manager to change the state of the IP
interface as required.
Using the BCC
Navigate to an IP interface-specific prompt and enter
state
state
state is
enabled (default)
disabled
For example, the following command disables IP interface 2.2.2.2.
ip/2.2.2.2# state disabled
ip/2.2.2.2#
Using Site Manager
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose Interfaces. The IP Interface List window opens.
4. Click on the interface you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
5. Set the Enable parameter. Click on Help
or see the parameter description on page
A-23.
6. Click on Apply, and then click on Done. Site Manager returns you to the
Configuration Manager window.
Seitenansicht 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 584 585

Kommentare zu diesen Handbüchern

Keine Kommentare