
Customizing RIP Services
117356-A Rev. A 6-7
Disabling and Reenabling RIP on an Interface
You can use the BCC or Site Manager to change the state of RIP on the interface
as required.
Using the BCC
Navigate to a RIP interface-specific prompt and enter
state
state
state is
enabled (default)
disabled
For example, the following command disables RIP on IP interface 2.2.2.2.
rip/2.2.2.2# state disabled
rip/2.2.2.2#
Using Site Manager
Site Manager Path
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose RIP. The RIP menu opens.
4. Choose Interfaces. The IP RIP Interface Configuration
window opens.
5. Click on the RIP interface you want to
enable.
The parameter values for that interface
appear in the IP RIP Interface
Configuration window.
6. Set the Enable parameter. Click on Help
or see the parameter description on page
A-83.
7. Click on Apply, and then click on Done. Site Manager returns you to the
Configuration Manager window.
Kommentare zu diesen Handbüchern