Avaya Configuring IP Services Bedienungsanleitung Seite 406
- Seite / 585
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Configuring IP Services
A-22 117356-A Rev. A
Parameter: Transmit Bcast Addr
Path: Select IP from the Select Protocols window and click on OK.
Default: 0.0.0.0
Options: 0.0.0.0 or any valid IP broadcast address
Function: Specifies the broadcast address that this IP subnet uses to broadcast
packets.Accepting 0.0.0.0 for this parameter specifies that the IP router will use
a broadcast address with a host portion of all 1s. Accepting 0.0.0.0 does not
configure the router to use the address 0.0.0.0 to broadcast packets. For
example, if you have IP address 123.1.1.1 and a subnet mask of 255.255.255.0,
accepting the default value 0.0.0.0 configures the IP router to use the address
123.1.1.255 to broadcast packets. To set the explicit broadcast address of all 1s,
enter 255.255.255.255 for this parameter.
Instructions: Accept the default, 0.0.0.0, unless the calculated broadcast address (host
portion) of all 1s is not adequate. If this is the case, then enter the appropriate IP
broadcast address in dotted-decimal notation. If you set the IP Address
parameter to 0.0.0.0 (to configure an unnumbered interface), Site Manager
automatically sets this parameter to 255.255.255.255.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.8
Parameter: UnNumbered Assoc Address
Path: Select IP from the Select Protocols window and click on OK.
Default: None
Options: Any valid IP address
Function: Specifies an address that IP uses when sourcing a packet. RIP uses this address
to make decisions about advertising subnets over the unnumbered interface. RIP
advertises subnets over the unnumbered interface if the subnets have the same
mask as the associated address.
Instructions: Specify the address of any numbered interface on the router. If you are running
RIP over the unnumbered interface and if you are using a subnet address as the
associated address, the local and remote associated addresses should have the
same network number. If you configure local and remote associated addresses
using different network numbers, you must use RIP2 mode.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.110
- Configuring IP 1
- Services 1
- Contents 5
- 117356-A Rev. A 10
- About This Guide 21
- Before You Begin 22
- Conventions 22
- Acronyms 23
- Bay Networks Customer Service 25
- How to Get Help 25
- Chapter 1 27
- IP Addresses 28
- 117356-A Rev. A 1-3 29
- Subnet Addressing 30
- 117356-A Rev. A 1-5 31
- 1-6 117356-A Rev. A 32
- Supernet Addressing 33
- Autonomous Systems 34
- Border Gateway Protocol (BGP) 36
- Router Discovery Protocol 37
- Route Preferences 38
- Route Weights 39
- 1-14 117356-A Rev. A 40
- Figure 1-3. IP Routing Table 41
- 1-16 117356-A Rev. A 42
- 117356-A Rev. A 1-17 43
- IP Traffic Filters 44
- RFC Compliance 44
- Chapter 2 47
- Starting IP 48
- 117356-A Rev. A 2-3 49
- Starting RIP 50
- Starting OSPF 51
- Starting BGP 52
- 117356-A Rev. A 2-7 53
- Chapter 3 55
- Deleting IP from an Interface 57
- Customizing IP 57
- Adding RIP to an IP Interface 59
- Customizing RIP 60
- Customizing OSPF 62
- Deleting BGP from the Router 64
- Customizing BGP 65
- Starting EGP 66
- Deleting EGP from the Router 67
- Customizing EGP 67
- Starting NAT 68
- 3-16 117356-A Rev. A 70
- 3-18 117356-A Rev. A 72
- 117356-A Rev. A 3-19 73
- 3-20 117356-A Rev. A 74
- Chapter 4 77
- 4-2 117356-A Rev. A 78
- The IP global prompt appears 79
- 4-4 117356-A Rev. A 80
- 4-8 117356-A Rev. A 84
- Bay Supported 85
- 4-10 117356-A Rev. A 86
- 4-22 117356-A Rev. A 98
- Customizing an IP Interface 100
- Customizing IP Services 101
- Configuring IP Services 102
- 4-26 117356-A Rev. A 102
- 4-28 117356-A Rev. A 104
- Using Site Manager 106
- Using the BCC 106
- Configuring SMDS 121
- 4-46 117356-A Rev. A 122
- Configuring an SMDS Address 125
- Defining an Adjacent Host 132
- Defining a Static Route 134
- Defining a Default Route 135
- 4-60 117356-A Rev. A 136
- Choosing a Broadcast Type 138
- 4-64 117356-A Rev. A 140
- Chapter 5 141
- Configuring Address Resolution 141
- ARP Overview 142
- 117356-A Rev. A 5-3 143
- 5-6 117356-A Rev. A 146
- Figure 5-2. Proxy ARP Example 149
- Chapter 6 155
- Customizing RIP Services 155
- Setting the RIP Diameter 157
- Customizing a RIP Interface 158
- 6-6 117356-A Rev. A 160
- Selecting the RIP Version 162
- Specifying the Update Mode 165
- Sending Triggered Updates 167
- Listening for a Default Route 177
- 6-24 117356-A Rev. A 178
- Configuring RIP Policies 186
- Chapter 7 191
- Customizing OSPF Services 191
- OSPF Concepts and Terminology 192
- OSPF Neighbors 193
- Neighbor Adjacencies 194
- Designated Routers 194
- OSPF Areas 195
- OSPF Router Types 196
- AS External Routes 196
- OSPF Implementation Notes 197
- OSPF interfaces 198
- For example: 199
- 7-10 117356-A Rev. A 200
- Supplying an OSPF ID 202
- 7-18 117356-A Rev. A 208
- Figure 7-2. OSPF ASE Routes 208
- 7-20 117356-A Rev. A 210
- (default) 212
- Setting the Holddown Timer 213
- Configuring Message Logging 214
- 7-28 117356-A Rev. A 218
- Enabling and Disabling OSPF 220
- Configuring an Area ID 221
- Specifying the Network Type 222
- 7-34 117356-A Rev. A 224
- Estimating the Transit Delay 228
- Setting the Hello Interval 231
- Setting the Dead Interval 233
- Specifying the Metric Cost 236
- Specifying the MTU Size 239
- Defining an Area 242
- Supplying an ID for the Area 243
- Modifying an Area ID 245
- Configuring Authentication 246
- Configuring a Summary Route 248
- Configuring a Stub Area 250
- 7-62 117356-A Rev. A 252
- 7-64 117356-A Rev. A 254
- 7-66 117356-A Rev. A 256
- 7-70 117356-A Rev. A 260
- Chapter 8 261
- Configuring BGP Services 261
- BGP Concepts and Terminology 262
- Configuring BGP Services 263
- IBGP in a Transit AS 264
- BGP Path Attributes 265
- 8-6 117356-A Rev. A 266
- BGP-4 Local Preference Values 267
- BGP Implementation Notes 268
- Configuring BGP on the Router 269
- Enabling and Disabling BGP 270
- Supplying a BGP Identifier 272
- Identifying the Local AS 273
- Setting the Interval Timer 276
- Enabling Multihop Connections 279
- Configuring BGP as a Soloist 281
- 8-26 117356-A Rev. A 286
- Negotiating the BGP Version 288
- Keeping the Connection Alive 290
- Specifying a Holddown Time 294
- Setting the Route Echo Switch 301
- 8-44 117356-A Rev. A 304
- 117356-A Rev. A 8-45 305
- 8-46 117356-A Rev. A 306
- Configuring Routing Policies 308
- 8-52 117356-A Rev. A 312
- OSPF/BGP Interaction 314
- Chapter 9 317
- Customizing EGP Services 317
- EGP Concepts and Terminology 318
- 9-4 117356-A Rev. A 320
- EGP Implementation Notes 321
- Customizing EGP on the Router 322
- Supplying a Local AS Number 323
- Configuring a Neighbor 324
- Specifying the Gateway Mode 326
- Choosing the Acquisition Mode 328
- Choosing the Poll Mode 329
- Setting Neighbor Timers 330
- Chapter 10 331
- 10-2 117356-A Rev. A 332
- Security Label Format 333
- 10-4 117356-A Rev. A 334
- Inbound IP Datagrams 335
- Forwarded IP Datagrams 335
- Originated IP Datagrams 336
- Unlabeled IP Datagrams 336
- Enabling and Disabling RIPSO 337
- 10-8 117356-A Rev. A 338
- 10-10 117356-A Rev. A 340
- 10-12 117356-A Rev. A 342
- 10-14 117356-A Rev. A 344
- Outbound Datagrams 345
- Error Datagrams 346
- RIPSO Example 347
- 10-18 117356-A Rev. A 348
- Figure 10-2. RIPSO Example 348
- Chapter 11 349
- 11-2 117356-A Rev. A 350
- BFE Addressing 351
- 117356-A Rev. A 11-5 353
- 11-6 117356-A Rev. A 354
- (continued) 355
- 11-8 117356-A Rev. A 356
- 117356-A Rev. A 11-9 357
- Chapter 12 359
- Overview 360
- 117356-A Rev. A 12-3 361
- 12-4 117356-A Rev. A 362
- 12-6 117356-A Rev. A 364
- Static Mapping 365
- 12-8 117356-A Rev. A 366
- Enabling and Disabling NAT 367
- 12-10 117356-A Rev. A 368
- Configuring the Log Mask 370
- Table 12-2. Log Message Types 371
- 12-14 117356-A Rev. A 372
- Customizing a NAT Interface 374
- Modifying the Interface Type 375
- Configuring Static Mapping 376
- Adding a Local Address Range 378
- 12-22 117356-A Rev. A 380
- Adding a Global Address Range 381
- 12-24 117356-A Rev. A 382
- Appendix A 385
- Site Manager Parameters 385
- 386
- 389
- A-8 117356-A Rev. A 392
- A-10 117356-A Rev. A 394
- A-12 117356-A Rev. A 396
- A-14 117356-A Rev. A 398
- A-16 117356-A Rev. A 400
- EGP Parameters 401
- 402
- 403
- 403
- A-20 117356-A Rev. A 404
- IP Parameters 405
- A-22 117356-A Rev. A 406
- A-24 117356-A Rev. A 408
- 410
- A-28 117356-A Rev. A 412
- A-30 117356-A Rev. A 414
- A-32 117356-A Rev. A 416
- 419
- A-36 117356-A Rev. A 420
- 421
- 422
- 423
- A-46 117356-A Rev. A 430
- 434
- A-52 117356-A Rev. A 436
- A-54 117356-A Rev. A 438
- 443
- A-60 117356-A Rev. A 444
- OSPF Parameters 445
- A-62 117356-A Rev. A 446
- A-64 117356-A Rev. A 448
- 449
- 450
- 450
- 452
- A-70 117356-A Rev. A 454
- A-72 117356-A Rev. A 456
- 457
- 457
- 460
- Area Range Parameters 462
- 463
- A-82 117356-A Rev. A 466
- RIP Parameters 467
- 468
- 469
- A-86 117356-A Rev. A 470
- 473
- NAT Parameters 474
- 476
- Appendix B 479
- Routing Policies 479
- B-2 117356-A Rev. A 480
- 482
- B-6 117356-A Rev. A 484
- 486
- B-10 117356-A Rev. A 488
- B-12 117356-A Rev. A 490
- B-14 117356-A Rev. A 492
- B-16 117356-A Rev. A 494
- if the Action 496
- IP Announce Policy Parameters 498
- B-22 117356-A Rev. A 500
- B-24 117356-A Rev. A 502
- B-26 117356-A Rev. A 504
- B-28 117356-A Rev. A 506
- B-30 117356-A Rev. A 508
- B-32 117356-A Rev. A 510
- B-34 117356-A Rev. A 512
- B-36 117356-A Rev. A 514
- B-38 117356-A Rev. A 516
- 517
- B-42 117356-A Rev. A 520
- 522
- 523
- B-46 117356-A Rev. A 524
- B-50 117356-A Rev. A 528
- 529
- B-52 117356-A Rev. A 530
- Appendix C 531
- C-2 117356-A Rev. A 532
- 533
- RIP Export Filters 535
- C-6 117356-A Rev. A 536
- 537
- OSPF Import Filters 538
- OSPF Export Filters 539
- C-10 117356-A Rev. A 540
- BGP-3 Import Filters 542
- 117356-A Rev. A C-13 543
- C-16 117356-A Rev. A 546
- BGP-3 Export Filters 547
- C-18 117356-A Rev. A 548
- EGP Import Filters 551
- EGP Export Filters 553
- C-24 117356-A Rev. A 554
- 555
- 117356-A Rev. A C-27 557
- Appendix D 559
- Route Weight Worksheet 559
- D-2 117356-A Rev. A 560
- D-4 117356-A Rev. A 562
- Appendix E 563
- IP/OSPF Configuration 563
- E-2 117356-A Rev. A 564
- IP/OSPF Configuration 565
- E-4 117356-A Rev. A 566
- E-6 117356-A Rev. A 568
- 117356-A Rev. A Index-1 571
- 117356-A Rev. A Index-3 573
- 117356-A Rev. A Index-5 575
- 117356-A Rev. A Index-7 577
- 117356-A Rev. A Index-9 579
- 117356-A Rev. A Index-11 581
- 117356-A Rev. A Index-13 583
- 117356-A Rev. A Index-15 585
Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring IP Services
Vernetzung Avaya BCM1000 Installationshandbuch
(90 Seiten)
(90 Seiten)
Vernetzung Avaya BCM3.x Bedienungsanleitung
(28 Seiten)
(28 Seiten)
Vernetzung Avaya V.34 Bedienungsanleitung
(34 Seiten)
(34 Seiten)
Vernetzung Avaya 1D5 Hinweis
(40 Seiten)
(40 Seiten)
Vernetzung Avaya Business Communications Manager 450 1.0 Configuration Bedienungsanleitung
(194 Seiten)
(194 Seiten)
Vernetzung Avaya Configuring Branch Office Tunnel between a Contivity and a BayRS Router Bedienungsanleitung
(29 Seiten)
(29 Seiten)
Vernetzung Avaya Quick2Config Bedienungsanleitung
(110 Seiten)
(110 Seiten)
Minka Lavery 1424-281 manuales
Manuales del propietario y guías del usuario para No Minka Lavery 1424-281.
Ofrecemos 1 manuales en pdf Minka Lavery 1424-281 para descargar gratis por tipos de documentos: Manual de instrucciones
Kommentare zu diesen Handbüchern