Avaya IP Telephony Konfigurationsanleitung PDF herunterladen (Seite 110)

110 Chapter 5 Configuring VoIP trunks

P0993474 03

Business Communications Manager requirements

Set the Business Communications Manager Local Gateway IP interface to the following:

• Set Call Signaling Method to either GatekeeperResolved or GatekeeperRouted, depending

on your system requirements.

•Set Gatekeeper IP to the IP address at which the CSE 1000 gatekeeper operates.

•Set Alias Names to a single H.323 identifier that is unique across all endpoints registered with

the gatekeeper. For example: “NAME:BCM-OTTAWA”. This H.323 identifier must exactly

match that in the CSE 1000 gatekeeper configuration. This entry is case-sensitive.

CSE 1000 configuration, adding an H.323 endpoint

In the Gatekeeper Admin tool, perform the following:

1 Select GK standby DB admin.

2 Select H.323 Endpoints.

3 Select Add H.323 Endpoint

4 Ensure the following fields are set:

5 Click Create H323.

Setting the H.323 Endpoint Dialing Plan

All dialing plan information must be identical on all H.323 endpoints using the gatekeeper.

Follow these steps to set the dialing plan into the Gatekeeper Admin tool:

1 Select GK Standby DB Admin.

2 Select NumberPlanEntries.

3 Select Create.

4 Ensure that the Endpoint you select is the one for which you want to create a numbering plan

entry.

5 Click Select.

Table 24 CSE 1000 H.323 endpoints

Field Value Description

H323AliasName <unique name> This is the unique name that identifies your Business

Communications Manager as an H.323 endpoint.

CDP Domain Name <choose name from list> If your system is using a CDP dialing plan, choose the

CDP domain name for the Business Communications

Manager.

Tandem Endpoint <choose name from list> This is the name of another H.323 endpoint. Picking a

name in this field provides a tandem endpoint.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 179 180

Keine Kommentare

Avaya IP Telephony Konfigurationsanleitung Seite 110