Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 46)

Configuring Frame Relay Services

4-4

Frame Relay Interface Parameters

Use the following descriptions as guidelines when you edit the parameters on the

Frame Relay Interface List window.

Parameter: Enable

Default: Enable

Options: Enable

| Disable

Function: Enables or disables Frame Relay service on this port.

Instructions: Set to Disable if you want to disable Frame Relay service on this interface

without deleting it. Set to Enable to re-enable Frame Relay service, if you

previously disabled it.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.1.1.2

Parameter: Mgmnt Type

Default: ANSI T1.617D

Options: DLCMI None

| Rev 1 LMI | ANSI T1.617D | CCITT Annex A |

LMI Switch

| Annex D Switch | Annex A Switch

Function: Speciﬁes the management protocol that the router and the Frame Relay

network use to communicate status information. Routers connected back

to back also use a management protocol to exchange status information.

DLCMI None provides no management interface between the router and

the Frame Relay network. In the absence of management support, you

must conﬁgure all PVCs manually.

Rev 1 LMI provides user-side management services as speciﬁed by

Revision 1 of the Local Management Interface standard.

ANSI T1.617D provides user-side management services as speciﬁed in

Annex D to ANSI standard T1.617-1991.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 46