Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 73)

Configuration Examples

A-7

OSPF Conﬁguration

Table A-6 lists the OSPF parameters that you must edit for each interface.

Conﬁguring the Group Mode PVCs

Once you have conﬁgured the protocols, your next step is to conﬁgure the

parameters for the two group mode PVCs. Refer to Chapter 4 for instructions on

adding PVCs.

Table A-7 lists the Frame Relay interface parameter that you must set for group

mode PVCs.

After setting the management protocol, go to the Frame Relay PVC List window

(refer to Figure 4-3) to see a listing of PVCs.

Changing the AS Boundary Router parameter to Ye s enables the router to recognize

any interfaces that are not conﬁgured for OSPF.

Table A-6. OSPF Parameters for Routers 5, 6, and 7

Parameter Name S21 S22 S23

OSPF Area 4.0.0.0 4.0.0.0 4.0.0.0

Type Point-to-Multipoint Point-to-Multipoint Point-to-Multipoint

AS Boundary Router

Ye s Ye s Ye s

Note: Adjacent hosts are unnecessary for OSPF.

Table A-7. Interface Parameter for Routers 5, 6, and 7

Parameter Name S21, S22, and S23

Mgmnt Type Select the management protocol supplied by your

Frame Relay provider.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 83 84

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 73