Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 48)

Configuring Frame Relay Services

4-6

Parameter: Address

Default: ADDR Q922

Options: ADDR Q922

| ADDR Q922 November 90 |

ADDR Q922 MARCH 90

| ADDR Q921

Function: Speciﬁes the DLCI addressing type.

ADDR Q922 selects addressing as speciﬁed in the ﬁnal version of the

Q.922 standard. Q.922 provides for FECN, BECN, DE, and EA bits.

While most Q.922 addresses are included within a 2-octet ﬁeld, the

standard allows for 3- and 4-octet address ﬁelds.

The November draft of ADDR Q922 differs from ADDR Q922 in

dropping the D/C bit from the extended (3- and 4-byte) forms.

The March draft of ADDR Q922 differs from ADDR Q922 in deﬁning an

11-bit DLCI and dropping the DE bit from the second octet of the address

ﬁeld.

ADDR Q921 differs from ADDR Q922 MARCH 90 in that it does not use

FECNs or BECNs.

Instructions: Select the addressing type for the Frame Relay interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.1.1.8

Parameter: Address Length

Default: Two Byte

Options: Two Byte

| Three Byte | Four Byte

Function: Speciﬁes the length of the Frame Relay address ﬁeld.

Instructions: Select the address length for the address ﬁeld. This must match what the

network speciﬁes.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.1.1.9

Note: The length of this ﬁeld determines the range of valid numbers for the

DLCI number set in the Frame Relay PVC List window. See the DLCI Number

parameter description for more details.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 83 84

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 48