Avaya Configuring IP Multicasting and Multimedia Services Bedienungsanleitung Seite 183

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 234
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 182
Site Manager Parameters
303527-A Rev. 00
A-13
Parameter: Route Supply
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Tunnel
Default: Disable
Options: Enable
|
Disable
Function: Supplies the default route (0.0.0.0) on this interface.
Instructions: Enable this feature if you want DVMRP to advertise a default route on this
interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.25
Parameter: Route Listen
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Tunnel
Default: Disable
Options: Enable
|
Disable
Function: Receives the default route (0.0.0.0) on this interface.
Instructions: Enable this feature if you want DVMRP to listen for a default route on this
interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.26
Parameter: Control Message Mode
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Tunnel
Default: Noencaps
Options: Encaps
|
Noencaps
Function: Specifies the encapsulation mode for IGMP control packets.
Noencaps causes IGMP to send control messages in regular IGMP packets
with the IP protocol type set to IP_PROTOCOL_IGMP.
Encaps causes IGMP to encapsulate control messages inside IP packets with
the IP protocol type set to IP_PROTOCOL_IPINIP.
All DVMRP messages sent across tunnels will be encapsulated in the same
way as data packets in this mode.
Instructions: Select an encapsulation mode for control messages.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.27
Seitenansicht 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare