Avaya Configuring IP Multicasting and Multimedia Services Bedienungsanleitung PDF herunterladen (Seite 195)

Site Manager Parameters

303527-A Rev. 00

A-25

Resource Manager Parameters

Parameter: Estimated Bandwidth

Path: Configuration Manager > XCVR, HSSI, MCT1, or COM Connector configured

for the RSVP protocol > Edit Line Resources > Edit Line Resources

Default: 0

Options: 0 to 214748364 b/s

Function: Specifies the estimated usable bandwidth for this line.

Instructions: Enter the estimated total bandwidth for this line in bits per second. To enable

line resource management, enter a value greater than zero. For point-to-point

lines, you can usually enter the total line speed.

For an Ethernet line, you must estimate a value, because shared-media lines may

not have all of the bandwidth available. You can base the estimate on line

statistics, the number of connected workstations, or other site-specific

information.

MIB Object ID: 1.3.6.1.4.1.18.3.5.16.2.1.3.1.3

Parameter: Reservable Bandwidth

Path: XCVR, HSSI, MCT1, or COM Connector configured for the RSVP protocol >

Edit Line Resources > Edit Line Resources

Default: 0

Options: 0 to 214748364 b/s

Function: Specifies the reservable bandwidth for this line.

Instructions: To enable reservable resources, enter the portion of this line’s bandwidth that

you want to make available for RSVP requests for guaranteed service. The value

must be greater than 0 and less than the value of the Estimated Bandwidth

parameter. Do not make all available bandwidth reservable; leave at least

15 percent for network management and routing protocols.

MIB Object ID: 1.3.6.1.4.1.18.3.5.16.2.1.3.1.4

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 233 234

Keine Kommentare

Avaya Configuring IP Multicasting and Multimedia Services Bedienungsanleitung Seite 195