Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 24)

Configuring RADIUS

1-8

303538-A Rev 00

Site Manager adds the letters DR to the connector’s name to designate it

as a RADIUS interface.

Keep the RADIUS Client Configuration window open and go to the next

section, “Specifying the Client’s IP Address.”

Specifying the Client’s IP Address

To enable RADIUS, you must specify the client’s Internet Protocol (IP) address.

As the RADIUS client, the router passes this address to the server when a remote

user makes an authentication or accounting request. The server does not accept the

request without the client’s IP address.

To configure the client’s IP address:

Enter an IP address for the Client IP Address parameter.

Keep the RADIUS Client Configuration window open and go to the next

section, “Specifying the Primary Server’s IP Address

.”

Site Manager: Client IP Address parameter: page A-1

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 77 78

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 24