Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 74)

Configuring RADIUS

C-10

303538-A Rev 00

Before You Begin

Before you begin, do the following:

Create and save a configuration file with at least one Frame Relay interface.

Retrieve the configuration file in local, remote, or dynamic mode.

Specify the router hardware if this is a local-mode configuration.

Enable Dial Backup Service

To enable dial backup service, configure a dial backup pool and circuit according

to the instructions in the previous section, “Configuring RADIUS Accounting

. ”

Enable RADIUS Accounting and Authentication

To enable RADIUS accounting and authentication, begin at the Configuration

Manager window:

Select Protocols > Global Protocols > RADIUS > Create RADIUS.

Site Manager displays the RADIUS Client Configuration window.

To configure a slot for RADIUS, click on the box labeled None.

Site Manager displays a menu showing the RADIUS options.

Select Both for the slot.

Click on the connectors that you want to configure as authentication

interfaces.

Enter 192.32.24.4 for the Client IP Address parameter.

Click on Server at the bottom of the window.

Site Manager displays the Primary Server Address window.

Enter 192.32.24.3 for the Server IP Address parameter.

Enter Client_ASN for the RADIUS Password parameter, then click on

OK.

Site Manager displays the RADIUS Server Configuration window, which

shows the default configuration for the server.

Accept the defaults for the server configuration parameters.

1 2 ... 69 70 71 72 73 74 75 76 77 78

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 74