Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 35)

100

Starting RADIUS

308640-14.00 Rev 00

2-7

Select a Protocol for RADIUS Authentication

Use the following steps to select a protocol. Once you select a protocol, the

RADIUS client automatically configures an unnumbered circuit interface for the

protocol. An unnumbered circuit interface has an address of 0.0.0.0, which means

that the circuit is not restricted to a specific remote destination address. This

enables the client to use the circuit for many remote users.

Site Manager Procedure

You do this System responds

1. In the RADIUS Client Configuration

window, click on

Dial-In Protocol

The RADIUS Dial_In Slot window opens.

2. Set the

Slot Number

parameter.

For more information, click on

Help

or see

the parameter description on page A-7

3. Click on

. The RADIUS Dial_In Protocol window

opens.

4. Enable the protocol you want to use.*

For more information, click on

Help

or see

the descriptions in “Protocol Parameters

for RADIUS Authentication” on page A-7.

* If your network uses only dial-up lines, we recommend that you enable IP together with RIP or the

Internet Packet Exchange (IPX) protocol. When you enable these protocols, Site Manager opens a

window that asks if the remote site is using dial-optimized routing.

If the remote site is using dial-optimized routing, click on OK. Site Manager automatically modifies

several routing update parameters so that the client can operate with dial-optimized routing.

If your network uses a combination of leased lines and dial-up lines (for example, using dial backup

service to support leased connections), it is unlikely that the routers use dial-optimized routing, so

click on Cancel. Site Manager will not modify the routing update parameters.

5. Click on

. You return to the RADIUS Client

Configuration window.

6. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software-Handbücher Avaya Configuring RADIUS