Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 72)

Configuring RADIUS

B-4

308640-14.00 Rev 00

show radius clients

The

show radius clients

command displays information about the router’s

RADIUS configuration.

You can use the following filter flags and filter arguments with this command:

The output contains the following information:

-slot

<slot>

Displays information about the RADIUS configuration in a

specific slot.

Slot Specifies the slot number in the RADIUS client.

Client IP Address Lists the IP address of the RADIUS client.

Authentication State Indicates whether authentication is enabled or disabled.

Accounting State Indicates whether accounting is enabled or disabled.

Accounting Direction Shows what calls generate accounting requests: incoming,

outgoing, or all.

Debug Message Level Displays the message debug level: no-debug, low, medium, or

high.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 99 100

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 72