Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 83)

100

Configuration Examples

308640-14.00 Rev 00

C-7

The next sections explain how to configure the sample network using the BCC

and Site Manager.

Using the BCC

To enable RADIUS accounting on a RADIUS client, complete the following

steps. (For more information on configuring ISDN interfaces, refer to Configuring

Dial Services.)

Start configuration mode by entering:

bcc>

config

To configure two B channels and one D channel on the interface, enter:

stack#

bri 3/1 mode 2b+d

Navigate to the channel prompt and make the BRI interface 3/1 a dial

object by entering:

channel/3/1#

dial

Navigate to the backup-pool prompt and add a backup line to the pool by

entering:

backup-pool/8#

backup-line bri/3/1

Navigate to the isdn-switch prompt and specify the switch type by

entering:

isdn-switch/3#

switch-type brini1

Navigate to the leased interface prompt for slot 2, connector 1 and create

a backup circuit with a backup mode by entering:

ppp/2/1#

backup-circuit pool-id 8 backup-mode initiator

Navigate to the backup circuit prompt and configure CHAP name

“bayrs1” and secret “east” for the backup circuit by entering:

backup-circuit/8/1/1#

chap-name bayrs1 chap-secret east

Navigate to the stack prompt and configure RADIUS accounting by

entering:

stack#

radius

To configure the RADIUS client on slot 2, address 192.32.24.2, enter:

radius#

radius-client slot 2 address 192.32.24.2

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 83

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software-Handbücher Avaya Configuring RADIUS