Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 89)

Configuration Examples

308640-14.00 Rev 00

C-13

The next sections explain how to configure the sample network using the BCC

and Site Manager.

Using the BCC

To enable RADIUS accounting and authentication on a RADIUS client, use the

following steps:

Start configuration mode by entering:

bcc>

config

Configure RADIUS on the box by entering:

box#

radius

To configure the RADIUS client on slot 3, address 192.32.24.4, enter:

radius#

radius-client slot 3 address 192.32.24.4

To enable RADIUS authentication and accounting for the RADIUS client

on slot 3, enter the following commands:

radius-client/3#

authentication enabled

radius-client/3#

accounting enabled

Navigate to the top-level RADIUS prompt by entering:

radius-client/3#

back

To configure the RADIUS server on address 192.32.24.3, enter:

radius#

radius-server address 192.32.24.3

Change the authentication-server-type to primary by entering:

radius-server/192.32.24.3#

authentication-server-type primary

Configure the primary-server-secret to baynet by entering:

radius-server/192.32.24.3#

primary-server-secret baynet

Using Site Manager

Before you begin, do the following:

Create and save a configuration file with at least one PPP interface.

Retrieve the configuration file in local, remote, or dynamic mode.

Specify the router hardware if this is a local-mode configuration.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 99 100

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 89