Avaya Configuring IP Utilities Bedienungsanleitung PDF herunterladen (Seite 123)

Customizing NTP Services

304234-A Rev 00

7-9

Specifying the Source IP Address

The source IP address allows you to specify a single IP address that NTP uses to

override the source address of the IP interface from which the NTP packet is

transmitted. Use this parameter only when you want the remote time server to

filter NTP timestamps for the local NTP client based on IP source address. You

should using a circuitless IP address as the source IP address.

You might also want to specify a source IP address when you have enabled

security features on a time server and you want to restrict access to it.

Using the BCC

By default, the source IP address is 0.0.0.0. To specify a source IP address that

overrides the source address of the IP interface from which the NTP packet is

transmitted, enter:

src-ip-address <

address

For example, the following command line causes NTP to use the source IP

address 4.4.4.4 to override the IP interface source address:

peer/3.3.3.3#

src-ip-address 4.4.4.4

peer/3.3.3.3#

7. Click on

Apply.

Site Manager sets the mode to Client.

Bay Networks supports only the Client

option.

8. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 227 228

Keine Kommentare

Avaya Configuring IP Utilities Bedienungsanleitung Seite 123