Avaya Configuring IP Utilities Bedienungsanleitung PDF herunterladen (Seite 50)

Configuring IP Utilities

2-12

304234-A Rev 00

To use Telnet to access the Technician Interface, you must assign at least one IP

address to the router. The number of Telnet connections you can make to the

Technician Interface is limited only by the availability of system resources (that is,

system memory).

Before you can enable Telnet on the router, you must first create TCP. After you

create TCP, you can create a Telnet server and Telnet client and modify their

default parameters. For information about creating TCP and Telnet on the router,

see Chapter 1. For information about modifying Telnet default parameters, see

Chapter 6.

Telnet Server

When you create a Telnet server, the router accepts inbound requests from a Telnet

client and establishes a Telnet session to the Technician Interface.

A PC with a network configuration can run a Telnet terminal emulation program

to establish a remote session on a router (Figure 2-3). In this case, the PC is

defined as a Telnet client and the router as a Telnet server.

Note:

We recommend that you establish no more than one Telnet session per

router.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 227 228

Keine Kommentare

Avaya Configuring IP Utilities Bedienungsanleitung Seite 50