Avaya Connecting ASN Routers to a Network Bedienungsanleitung PDF herunterladen (Seite 21)

Selecting a Boot Configuration

308652-14.00 Rev 00

1-3

Getting a software image or configuration file over the network is called

Netbooting. Getting a file from the file system stored in local Flash memory is

called Local booting.

To initially start up the ASN, you can use one of these options:

• EZ-Install (the default)

• Netboot

• Local Boot

To start up the ASN after the initial configuration, you use one of these boot

configuration options:

• Netboot

• Directed Netboot

• Local Boot

Table 1-1

summarizes the startup options. The section that follows, “The Network

Boot Process,” describes what happens when you use each option.

Table 1-1. Summary of Boot Options

Boot

Option

Source for

Software

Image

Source for

Config File Description and Requirements

EZ-Install Local

(Flash

memory)

Network

(Synchronous

connection)

The default option. The 100BASE-T Hub boots from a

software image in local memory, then transmits a request for

its IP address and configuration file through an attached

synchronous interface.

Next, a remote UNIX- or DOS-based workstation that is

configured as a Boot Protocol (BOOTP) server downloads a

customized configuration file; you save that configuration to

Flash memory.

Requires a communications link over an HDLC or Frame

Relay interface.

If EZ-Install fails, the router tries the Local Boot procedure.

(continued)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Connecting ASN Routers to a Network Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya Connecting ASN Routers to a Network