Avaya Connecting ASN Routers to a Network Bedienungsanleitung PDF herunterladen (Seite 62)

Connecting ASN Routers to a Network

3-12

308652-14.00 Rev 00

Parameter: Connector

Path: Configuration Manager > Protocols > Global Protocols > Net Boot >

Interfaces

Default: None

Options: COM1

COM2

XCVR1

XCVR2

Function: Identifies the connector configured as a Netboot interface.

Instructions: Enter the connector name for the Netboot interface. To use Netboot over a

synchronous interface, enter COM1 or COM2. To use Netboot over an

Ethernet interface, enter XCVR1 or XCVR2.

MIB Object ID: None

Parameter: Connector IP Address

Path: Configuration Manager > Protocols > Global Protocols > Net Boot >

Interfaces

Default: None

Options: Any valid IP address

Function: Specifies the IP address of the remote netbooting router that is using

EZ-Install. This parameter applies only to a Frame Relay group access

PVC connection.

Instructions: Enter the IP address of the remote netbooting router’s interface, in dotted

decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.4

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 107 108

Keine Kommentare

Avaya Connecting ASN Routers to a Network Bedienungsanleitung Seite 62