Avaya Connecting ASN Routers to a Network Bedienungsanleitung PDF herunterladen (Seite 58)

Connecting ASN Routers to a Network

3-8

308652-14.00 Rev 00

Parameter: Boot Image Pathname

Path: Configuration Manager > Protocols > Global Protocols > Net Boot >

Global

Default: None

Options: A valid image file pathname

Function: When the parameter Boot Image From Network is set to Enable, this

parameter specifies the absolute pathname of the boot image file on the

TFTP server.

When you Netboot the router, this parameter shows the full path to the

active image on the remote server. When you boot an ASN locally, the

name of the active image (wfHwEntry.wfHwActiveImageName) appears in

the form <volume>:<image name>.

Instructions: Use this parameter only when configuring Directed Netboot. Make sure

the file you specify is the valid image file on the TFTP server.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.4

Parameter: Boot Config Pathname

Path: Configuration Manager > Protocols > Global Protocols > Net Boot >

Global

Default: None

Options: A valid configuration file pathname

Function: When the parameter Boot Config From Network is set to Enable, this

parameter specifies the absolute pathname of the boot configuration file

on the TFTP server.

Instructions: Use this parameter only when configuring Directed Netboot. Make sure

the file you specify is the valid configuration file on the TFTP server.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.5

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 107 108

Keine Kommentare

Avaya Connecting ASN Routers to a Network Bedienungsanleitung Seite 58