Avaya Using Technician Interface Software Bedienungsanleitung PDF herunterladen (Seite 149)

System Administration

308657-14.00 Rev 00

7-13

Adding Scheduled Boot Services to a Router

To add a scheduled boot service:

Add the RUIBOOT base record to the router configuration:

configure with a scheduled boot event.

For instructions on logging in through a local console or remote Telnet

session, see Chapter 1.

Define a slot mask for scheduled boot services on the router.

You must define a slot mask for the RUIBOOT entity, before creating the

scheduled boot service on the router. The slot mask identifies the slots on

which the system loads and runs RUIBOOT. Enter the following at the

Technician Interface prompt:

BN [3]:

set wfServices.wfRuiBootLoad.0 0x7FFE0000

BN [3]:

commit

This command allows RUIBOOT, once created, to run on all slots. The

hexadecimal value

0x7FFE0000

works for any model of Nortel Networks

router, regardless of the number of slots in that router.

Add the RUIBOOT service to the router configuration, as follows:

BN [3]:

set wfRuiBoot.wfRuiBootBaseDelete.0 1

BN [3]:

commit

These commands also enable scheduled boot services on the router. (The system

sets the attribute wfRuiBootBaseDisable, OID = 1.3.6.1.4.1.18.3.3.2.14.1.1, in the

RUIBOOT base record to its default value of 1 or enabled.)

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 343 344

Keine Kommentare

Avaya Using Technician Interface Software Bedienungsanleitung Seite 149