Avaya B5800 Bedienungsanleitung Seite 213

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 324
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 212
4. Restart the B5800 Branch Gateway system.
5. Use Manager to delete the trunks or extensions/users in the configuration that are
no longer supported by the replacement component.
Replacing a component with one of a different type
About this task
If you are replacing a component with one of a different type, you must perform two procedures;
one to permanently remove the component and then one to add the component.
Procedure
1. Remove the existing component. See
Permanently removing a component on
page 214.
Note:
Be sure to reboot the system and edit the configuration after you remove the
component.
2. Install the new component. See
Adding a new component on page 213.
Adding a new component
About this task
If you are adding a new component to an available slot or port, when restarted the B5800
Branch Gateway system will automatically create configuration entries for the new trunks or
extensions/users.
Procedure
1. Turn the B5800 Branch Gateway system off. See System shutdown on page 208.
2. Install the new component using the appropriate procedure for the type of
component. See Base and trunk card installation on page 61 or Connecting external
expansion modules on page 72 for more information.
3. Restart the B5800 Branch Gateway system.
4. Use Manager to configure the new trunks or extension/users.
About changing components
Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 213
Seitenansicht 212
1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 323 324

Kommentare zu diesen Handbüchern

Keine Kommentare