Base Card LEDs 1 to 8 Usage
• Green on = expansion module present
• Red flashing = initializing
• Red on = error
• Orange regular flash = base card okay
Combination LEDs 1 to 6
Green on = phone detected
Trunk daughter card LEDs
Trunk Daughter Card LEDs 9 to 12 Usage
All cards LED 9 is used for daughter card status:
• Red on = error
• Red slow flash = initializing
• Red flash every 5 seconds = card okay
• Red fast flash = system shutdown
Analog trunk
• Green on =card fitted
• Green flashing = trunk in use
BRI trunk
• Off = no trunk present
• Green on = trunk present
• Green flashing = trunk in use
PRI trunk
• Off = no trunk present
• Green on = trunk present
• Green flashing = trunk in use
• Red/green fast flash (port 9) or greenfast
flash (port 10) = alarm indication signal
(AIS) from the trunk remote end
• Red with green blink (port 9) or green blink
(port 10): port in loopback mode (set
through System Monitor)
Hardware and software installation
86 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012
Kommentare zu diesen Handbüchern