Avaya R2MFC Konfigurationsanleitung PDF herunterladen (Seite 52)

52 Chapter 4 Configuring the R2MFC MBM

N0027684 01

Figure 20 BCM lines configuration for R2MFC MBM

Turning on second dial tone

Second dial tone, when turned on, generates and supplies, a second dial tone to the end user, after

the end user dials the trunk access code. Second dial tone can be used with any country code,

including customized country codes. DIP switch 6 is designated for turning on or off second dial

tone. Changes to the dial tone DIP switch become effective, as soon as the DIP switch changes

position, and does not require a restart to take effect. The BCM outgoing dialing must be set to

Overlap in order for second dial tone to work properly.

Use the following steps to turn on second dial tone:

1 Set Config DIP switch number 6 to the up position. See Figure 16 on page 47 for the Config

DIP switch layout.

2 Open the Unified Manager. See the Programming guide for the host system for an explanation

of how to use Unified Manager.

3 Click the Configuration button on the Unified Manager main page.

The Unified Manager main display opens.

4 Enter your Unified Manager login credentials.

5 Expand the Services > Telephony Services > Call routing > Routes headings from the

navigation tree. See Figure 21 on page 53.

The routes configured on the BCM are listed below the Routes heading.

6 Select the route that is to be configured under the Routes heading. See Figure 21 on page 53.

The Route # information frame displays.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 105 106

Keine Kommentare

Avaya R2MFC Konfigurationsanleitung Seite 52