Avaya BCM50 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 19)

Chapter 3 Hardware Troubleshooting 19

BCM50 Troubleshooting Guide

During BCM50 system startup or reboot, the system status LEDs move through a sequence of state

changes. If either the power LED or status LED is yellow, the system is initializing and is not

ready for service. The table System status LEDs during startup or reboot on page 19 shows the key

states indicating service availability.

LAN port LEDs

Each LAN port on the main unit and expansion unit has two LEDs. These LEDs indicate the status

of the connection for that LAN port. The figure LAN port LED locations on page 20 shows the

location of these LEDs on the main units and expansion unit.

Table 2 System status LEDs during startup or reboot

Power

Status

Description

Solid yellow Any System initializing; not ready for service.

Flashing or solid

green

Flashing or

solid yellow

System initializing; not ready for service.

Flashing green Flashing green BCM50 telephony services are available, including IP telephony and

voice mail.

Solid green Flashing green Administrator can log into BCM50 with Element Manager.

Solid green Solid green All BCM50 services are functioning, and the system is ready for normal

use.

Note: The expansion ports on the main unit also function as LAN ports. The

expansion port LEDs indicate LAN activity only. The LEDs do not indicate

expansion unit presence. The LEDs do not light.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

Keine Kommentare

Avaya BCM50 Anleitung zur Fehlerbehebung Seite 19