Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung PDF herunterladen (Seite 103)

Site Manager Parameters

308623-14.00 Rev 00

A-15

Parameter: Flow Control Pause Time

Path: Configuration Manager > XCVR Connector > Edit Line

Default: 65535

Options:

32 to 65535 pause times

Function:

Specifies the flow control pause time. The pause time is used to calculate the

total time a transmitter pauses. For example, when a transmitter receives a pause

frame, it pauses for

pause_time

* 512 bit times. (The value 512 bit times

converts to 51.2 ms for 10 Mb/s, 5.12 ms for 100 Mb/s, and 512 ns for Gigabit.)

Therefore, if the pause time is 65535 and the line speed is 100 Mb/s, then the

transmitter pauses for 335.54 ms (65535 * 5.12 ms).

Instructions:

Accept the default, 65535, or specify a value from 32 to 65535.

MIB Object ID:

1.3.6.1.4.1.18.3.4.1.1.67

Parameter: Transmit Pause Zero Enable

Path:

Configuration Manager > XCVR Connector > Edit Line

Default: Enable

Options: Enable

Disable

Function: Enables or disables the ability of a congested receiver to send a pause frame

with a pause time of 0 when it is no longer congested. When the remote

transmitter receives a pause frame with a 0 pause time, it resumes sending

packets.

Instructions: Accept the default, Enable, if you want a congested receiver to send a pause

frame with a pause time of 0 when it is no longer congested. Choose Disable if

you do not want a congested receiver to send a pause frame with a 0 pause time.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.68

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 155 156

Keine Kommentare

Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung Seite 103