Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung PDF herunterladen (Seite 127)

BCC show Commands

308623-14.00 Rev 00

B-9

show ethernet sample

The

show ethernet sample

command displays data sampled from Ethernet interfaces

over a period of 10 seconds. You can change the number of seconds over which you want

to sample the data, and you can display sampled data for a specific circuit or slot only.

This command allows for the following command filters (flags) and filter arguments:

The output includes the following information:

-period

<number_of_seconds>

Displays data sampled during the period (number of seconds)

specified.

-circuit

<circuit_name>

Displays information about the specified circuit only.

-slot

<slot>

Displays information about the specified slot only.

<circuit_name>

Displays information about the specified circuit only.

Slot/Conn Slot location of the Ethernet module within the chassis and the

connector number.

Circuit Name of the circuit associated with this line.

Input Rate/<sec.> (bytes/sec) Number of octets received without error.

Input Rate/<sec.> (Pkts/sec) Number of frames received without error.

Output Rate/<sec.> (bytes/

sec)

Number of octets transmitted without error.

Output Rate/<sec.> (Pkts/sec) Number of frames transmitted without error.

Input Lack of Resource Number of

receiver lack of resource

errors.

Output Lack of Resource Number of frames clipped in the driver’s transmit routine due to

congestion.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 155 156

Keine Kommentare

Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung Seite 127