Avaya Configuring ATM Half-Bridge Services Bedienungsanleitung PDF herunterladen (Seite 71)

AHB, BootP/DHCP, IP, and ATM Parameter Descriptions

308611-14.00 Rev 00

A-15

IP Configuration Parameters

Parameter: Target Server IP Address

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv > Add

Default: None

Options: Any valid IP address

Function: Specifies the address of the DHCP server that should receive DHCP packets.

Instructions: Enter the IP address of the DHCP server that should receive DHCP packets.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.4

Parameter: IP Address

Path: Select IP from the Select Protocols window and click on OK.

Default: None

Options: 0.0.0.0 or any valid IP address

Function: Assigns a 32-bit IP address to the interface.

Instructions: Enter the IP address of the interface in dotted-decimal notation. Enter 0.0.0.0 to

configure an unnumbered interface on the circuit.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.4

Parameter: Subnet Mask

Path: Select IP from the Select Protocols window and click on OK.

Default: None

Options: The Configuration Manager automatically calculates an appropriate subnet

mask, depending on the class of the network to which the interface connects.

However, you can change the subnet mask with this parameter.

Function: Specifies the network and subnetwork portion of the 32-bit IP address.

Instructions: Either accept the assigned subnet mask or enter another subnet mask in

dotted-decimal notation. Enter 0.0.0.0 if you are configuring an unnumbered

interface on the circuit.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.6

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 93 94

Keine Kommentare

Avaya Configuring ATM Half-Bridge Services Bedienungsanleitung Seite 71