Avaya Configuring ATM Half-Bridge Services Bedienungsanleitung PDF herunterladen (Seite 75)

AHB, BootP/DHCP, IP, and ATM Parameter Descriptions

308611-14.00 Rev 00

A-19

ATM Service Record Parameter Descriptions

Service record parameters define the ATM service records for an interface. The

ATM Service Records List window also provides access to:

• Specific PVC parameters (PVC service records only)

• All SVCs on that service record (SVC service records only)

• LEC attributes (SVC service records using LANE data encapsulation)

Figure A-8

shows the sequence of windows that can appear when you select the

service attributes category and configure a PVC.

Parameter: Enable ATM Signaling

Path: Configuration Manager > Protocols > ATM > Interfaces

Default: Enable

Options: Enable

Disable

Function: Specifies whether ATM signaling is enabled or disabled for this interface.

Signaling allows you to configure switched features (for example, SVCs and

LANE) on the interface.

If you do not intend to configure any switched features on this interface (that is,

you want this interface to run only PVCs), disabling this parameter makes

additional system resources available.

Instructions: Accept the default, Enable, if you want to enable signaling on this interface. Set

the state to Disable if you want to disable signaling on this interface.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.1.1.16

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 93 94

Keine Kommentare

Avaya Configuring ATM Half-Bridge Services Bedienungsanleitung Seite 75