
Configuring Dial Services
2-4 114062 Rev. A
Unlike other data link protocols, LAPD can handle multiple users on the same
multiaccess interface.
Figure 2-3 shows a LAPD frame.
Figure 2-3. LAPD Frame
The fields in the LAPD frame are as follows:
• The opening flag and closing flag fields are High Level Data Link Control
(HDLC) flags that separate one frame from the next.
• The address field contains two kinds of information. It provides a data-link
layer entity; more specifically, a logical point that defines the data link
between the user and the network. This portion of the address is the service
access point identifier (SAPI). The address field also contains a number to
identify the terminal equipment connected to the ISDN network. This is the
terminal endpoint identifier (TEI). Either the network assigns a unique
number to each device or you set this number at the device.
• The control field identifies the type of frame. This field also contains
sequence numbering.
• The information field contains data to set up the link.
• The frame-check sequence is a cyclic-redundancy check.
Opening Flag
Address
Control
Information
Closing Flag
Frame Check Sequence
DS0009A
Kommentare zu diesen Handbüchern