Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Bedienungsanleitung PDF herunterladen (Seite 224)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-48

308628-14.00 Rev 00

Parameter: Estimated Hosts

Path: Configuration Manager > Protocols > IP > Global

Default: 0

Options: 0 to 2,147,483,647

Function: Allows the IP software to preallocate system resources based on the anticipated

size of the routing table. Preallocation of memory increases the speed with which

IP software can learn routes because it removes the overhead caused by dynamic

memory allocation.

Instructions: Set to the number of hosts that you expect. Avoid using a number that is

excessively large. This will cause a wasteful overallocation of memory. If you

use the default value, 0, IP software preallocates memory for 500 routing table

entries.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.13

Parameter: Enable Default Route for Subnets

Path: Configuration Manager > Protocols > IP > Global

Default: Disable

Options: Enable

Disable

Function: Specifies whether the IP router uses a default route for unknown subnets. The

default route must be present in the routing table. When you set this parameter

to Enable, the IP router uses a default route. When you set this parameter to

Disable, the IP router does not use a default route.

Instructions: Accept the default, Disable, if you do not want the IP router to use a default

route for unknown subnets. Otherwise, reset this parameter to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.14

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 307 308

Keine Kommentare

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Bedienungsanleitung Seite 224