Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Bedienungsanleitung Seite 297
- Seite / 308
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Translating Cisco to Nortel Networks Equivalents
308628-14.00 Rev 00
C-9
Interpreting the Cisco and Nortel Networks BGP Operational
Table
The following list describes the function of the Cisco and Nortel Networks BCC
operational commands in the corresponding row of Table C-2
.
1.
Do not synchronize between BGP and IGP; this enables a router to advertise a
BGP network to an external peer without having that network exist in the IP
routing table.
2.
Route reflection is a method to alleviate the need for “full mesh” IBGP by
allowing an internal BGP speaker to reflect (or re-advertise) routes learned
through an IBGP connection to another IBGP peer.
3.
Minimize the instability caused by route flapping.
4.
Confederations are used to reduce the number of peers in an AS by breaking
the network into multiple (smaller) ASs.
5.
The Collision Detection feature (if disabled) allows redundant BGP
connections to the same router.
6.
Show BGP routing table.
7.
Show status of BGP peers.
8.
Show the router’s BGP timers. Within Cisco’s show ip /jointfilesconvert/106988/bgp neighbor
command the keepalive, holddown and external advertisement timers are
displayed.
9.
Display the router’s announce policies. Cisco’s show ip /jointfilesconvert/106988/bgp neighbor
command displays the router’s incoming and outgoing route filters.
10.
Show BGP routes between peers 1.1.1.1 and 1.1.1.2.
11.
Display the BGP routes for either AS 123 or 456. Refer to the Cisco and
Nortel Networks regular expression tables at the end of this appendix for
information about the arguments that are available for these commands.
12.
Show a summary of BGP global parameters.
13.
Reset a neighbor’s BGP connection.
14.
Display BGP updates/changes as they occur.
15.
Show any BGP errors.
16.
Display the IP routing table.
- Configuring IP Exterior 1
- Gateway Protocols (BGP and 1
- Trademarks 2
- Statement of Conditions 2
- Contents 5
- 308628-14.00 Rev 00 10
- 308628-14.00 Rev 00 11
- Before You Begin 15
- Text Conventions 16
- Set Trap Monitor Filters 17
- Acronyms 18
- Hard-Copy Technical Manuals 19
- How to Get Help 20
- Chapter 1 21
- Border Gateway Protocol (BGP) 23
- BGP Concepts and Terminology 24
- Peer-to-Peer Sessions 25
- Interior BGP Routing 26
- IBGP Route Reflector 27
- Equal-Cost Multipath 28
- BGP Updates 28
- Path Attributes 29
- BGP/OSPF Interaction 30
- BGP-4 Confederations 30
- BGP Implementation Notes 31
- Chapter 2 33
- <mask> 34
- Starting BGP 35
- Chapter 3 37
- Deleting BGP from the Router 39
- Starting EGP 40
- Deleting EGP from the Router 42
- Customizing EGP 42
- Next-hop address 0 44
- Next-hop mask 0 44
- Chapter 4 45
- The IP global prompt appears 46
- Defining a Static Route 53
- Chapter 5 59
- Enabling and Disabling BGP 60
- Supplying a BGP Identifier 62
- Identifying the Local AS 63
- Enabling Multihop Connections 69
- Configuring BGP as a Soloist 72
- Best-Route Selection 86
- <name> 91
- Chapter 6 95
- Negotiating the BGP Version 100
- Keeping the Connection Alive 101
- Using the BCC 102
- Using Site Manager 102
- Specifying a Holddown Time 104
- Setting the Route Echo Switch 110
- Chapter 7 117
- Defining a BGP Accept Policy 118
- Using Site Manage 126
- (continued) 129
- (continued) 131
- Chapter 8 141
- Configuring a Route Reflector 141
- Configuring an RR Client 149
- 2.2.2.3): 150
- Chapter 9 153
- Chapter 10 163
- Customizing EGP Services 163
- EGP Concepts and Terminology 164
- EGP Implementation Notes 167
- Customizing EGP on the Router 168
- Supplying a Local AS Number 169
- Configuring a Neighbor 170
- Specifying the Gateway Mode 172
- Choosing the Acquisition Mode 174
- Choosing the Poll Mode 175
- Setting Neighbor Timers 176
- Appendix A 177
- Site Manager Parameters 177
- BGP Configuration Parameters 178
- BGP Global Parameters 178
- BGP-3 Global Parameter 186
- BGP-4 Global Parameter 186
- BGP Peer Parameters 186
- BGP Event Message Parameters 198
- EGP Parameters 200
- EGP Neighbor Parameters 201
- IP Parameters 204
- IP Interface Parameters 206
- IP Global Parameters 220
- Static Route Parameters 227
- Adjacent Host Parameters 230
- Appendix B 235
- Routing Policies 235
- Appendix C 289
- Commands 296
- Regular Expression Symbols 300
Verwandte Produkte und Handbücher für Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)
Software Avaya CS1000 Bedienungsanleitung
(456 Seiten)
(456 Seiten)
Software Avaya Business Communication Manager 5.0 - Configuration - Devices Bedienungsanleitung
(258 Seiten)
(258 Seiten)
Software Avaya FireWall-1 Bedienungsanleitung
(68 Seiten)
(68 Seiten)
Software Avaya PeriReporter Bedienungsanleitung
(122 Seiten)
(122 Seiten)
Software Avaya PeriProducer 3.00 (Software Release 3.00) - Business Communications Manager Hinweis
(48 Seiten)
(48 Seiten)
Software Avaya Business Communications Manager - Intelligent Contact Center Bedienungsanleitung
(258 Seiten)
(258 Seiten)
Software Avaya BCM50 Konfigurationsanleitung
(568 Seiten)
(568 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.148 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern