
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-50
308628-14.00 Rev 00
Parameter: Enable ISP Mode Support
Path: Configuration Manager > Protocols > IP > Global
Default: Disable
Options: Enable
|
Disable
Function: Enables and disables internet service provider (ISP) features.
Instructions: Use this parameter to configure BGP as a soloist and to disable the use of
forwarding tables on IP interfaces.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.19
Parameter: IBGP ECMP Enable
Path: Configuration Manager > Protocols > IP > Global
Default: Disable
Options: Enable
|
Disable
Function: Allows BGP to select an IP route to the IBGP next hop using available ECMP
routing information supplied by the IGP (RIP or OSPF) used in the AS.
Instructions: Make sure that ECMP is enabled for the IGP used in the AS.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.23
Parameter: Percentage of ARP Buffers
Path: Configuration Manager > Protocols > IP > Global
Default: 100
Options: An integer indicating the percentage of buffers
Function: Defines the upper limit (as a percentage) of buffers that ARP can use for saving
buffers when resolving ARP requests.
Instructions: Specify the percentage as an integer.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.27
Kommentare zu diesen Handbüchern