Avaya Configuring DECnet Services Bedienungsanleitung PDF herunterladen (Seite 43)

Editing DECnet Parameters

308619-14.00 Rev 00

3-5

Parameter: Level 1 Only Area

Default: 1

Options: 1 to 63

Function: Specifies the DECnet Area ID for all circuits if you configured the router

as Level 1 Only. The Area ID is the first 6 bits of a DECnet node address.

Instructions: Specify the Area ID by entering a number from 1 to 63. You cannot

configure this parameter unless you first configure the router to perform

Level 1 Only routing.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.1.20

Parameter: Broadcast Route Timer

Default: 180

Options: 1 to 65535

Function: Determines the maximum amount of time in seconds between routing

updates that the router issues. If no routing update occurs before this timer

expires, the router generates a routing update automatically.

Instructions: Enter a number from 1 to 65535. If you want the Nortel Networks router

to generate routing updates more frequently, enter a lower value than the

current one.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.1.4

Parameter: Route Max Addr

Default: 1023

Options: 1 to 1023

Function: Specifies the highest Node ID contained within all areas.

Instructions: We recommend accepting the default value. If you change the default,

make certain to use the same value for each router in the network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.1.6

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 79 80

Keine Kommentare

Avaya Configuring DECnet Services Bedienungsanleitung Seite 43