Avaya Configuring DECnet Services Bedienungsanleitung PDF herunterladen (Seite 58)

Configuring DECnet Services

3-20

308619-14.00 Rev 00

Parameter: Static Route Enable

Default: Enable

Options: Enable

Disable

Function: Specifies the state (active or inactive) of the static route record in the

DECnet routing tables.

Instructions: Select Disable to make the static route record inactive in the DECnet

routing table; the DECnet router will not consider this static route.

Select Enable to make the static route record active again in the DECnet

routing table.

If you did not first add a static route, no default is displayed and you

cannot configure this parameter. When you add a static route, this

parameter defaults to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.8.1.2

Parameter: Route Type

Default: Level 2

Options: Level 1

Level 2

Function: Specifies the type of traffic that is routed over this interface. Level 1

routing is for routing data within an area. Level 2 routing is for routing

data between areas.

Instructions: Select the traffic type for this static route.

If you did not first add a static route, no default is displayed and you

cannot configure this parameter. When you add a static route, this

parameter defaults to Level 2.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.8.1.3

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 79 80

Keine Kommentare

Avaya Configuring DECnet Services Bedienungsanleitung Seite 58