Avaya Configuring DECnet Services Bedienungsanleitung PDF herunterladen (Seite 52)

Configuring DECnet Services

3-14

308619-14.00 Rev 00

Parameter: Max Routers

Default: 33

Options: 0 to 33

Function: Specifies the maximum number of routers attached to this circuit,

including the router on which you are configuring DECnet services.

Instructions: We recommend accepting the default value. If you change the default,

refer to your network topology drawing to determine the number of

routers and then enter it here.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.2.1.12

Parameter: Router Priority

Default: 64

Options: 0 to 127

Function: Determines which router becomes the designated router on a circuit. The

designated router performs additional services for other nodes attached to

the circuit. (All these nodes know the address of the designated router.)

When an end node attempts to send a packet to a destination node that is

not in its destination address cache, or does not reside on the circuit, it

sends the packet to the designated router, which forwards the packet

toward the destination.

If you do not choose a designated router, or if you assign two or more

routers the same priority, the router with the highest Node ID becomes the

designated router by default.

Instructions: Enter a router priority value from 0 to 127. If you want this node to be the

designated router on this circuit, assign it the highest priority value among

all routers on the circuit.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.2.1.13

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 79 80

Keine Kommentare

Avaya Configuring DECnet Services Bedienungsanleitung Seite 52