Avaya Configuring DECnet Services Bedienungsanleitung PDF herunterladen (Seite 47)

Editing DECnet Parameters

308619-14.00 Rev 00

3-9

Parameter: Max Area

Default: 63

Options: 1 to 63

Function: Specifies the highest area number in your DECnet network, that is, the

number of areas in your DECnet network. You may want to set this value

lower than the default to conserve slot memory.

Instructions: Refer to your network topology map, and then enter the highest area

number.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.1.15

Editing DECnet Interface Parameters

To edit a DECnet interface, begin at the Configuration Manager window (refer to

Figure 3-1) and proceed as follows.

Select Protocols > DECnet IV > Interfaces.

The DECnet IV Interface List window appears (Figure 3-3

). The window

displays all interfaces on which DECnet is enabled.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 79 80

Keine Kommentare

Avaya Configuring DECnet Services Bedienungsanleitung Seite 47