Avaya Configuring DECnet Services Bedienungsanleitung PDF herunterladen (Seite 66)

Configuring DECnet Services

3-28

308619-14.00 Rev 00

Parameter: Adjacency Priority

Default: None

Options: 0 to 127

Function: If the static adjacency is another router, this parameter specifies the

router’s priority for becoming the designated router on the network. The

designated router performs additional services for other nodes attached to

the circuit. (All these nodes know the address of the designated router.)

If you do not choose a designated router, or if you assign two or more

routers the same priority, the router with the highest Node ID becomes the

designated router by default.

Instructions: Enter a router priority value from 0 to 127. If you want this node to be the

designated router on this circuit, assign it the highest priority value among

all routers on the circuit.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.7.8

Parameter: Adjacent Host Address

Default: None

Options: Depends on the circuit type (see below).

Function: Specifies the address of an adjacent host.

Instructions: Enter the adjacent host address by following these guidelines:

• If this circuit is not an X.25 PDN circuit, enter the 48-bit Ethernet

address of the static adjacency.

• If this circuit is an X.25 circuit that connects to an X.25 permanent

virtual circuit (PVC), enter an X.25 logical channel number.

• If this circuit is an X.25 circuit that connects to an X.25 switched

virtual circuit (SVC), then enter a valid X.121 address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.7.9

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 79 80

Keine Kommentare

Avaya Configuring DECnet Services Bedienungsanleitung Seite 66