Avaya Configuring DLSw Services Bedienungsanleitung PDF herunterladen (Seite 112)

Configuring DLSw Services

5-12

Parameter: Maximum Package Size

Default: 1532 bytes

Range: 0 to 2147483647

Function: Speciﬁes the maximum package size (in bytes) when sending multiple

DLSw frames in a single TCP frame for transmission over a wide area

network.

Instructions: Specify a value smaller than the TCP Window Size parameter and less

than or equal to the Virtual Ring MTU size for the network minus the size

of the TCP/IP and MAC headers.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.23

Parameter: Packaging Timeout

Default: 10 milliseconds (ms)

Range: 0 to 2147483647

Function: Speciﬁes the time interval (in milliseconds) to delay a package before

sending it to TCP. This value is based on the Packaging Threshold

parameter. The value should not be greater than the time it takes to send

the number of outstanding bytes before packaging begins.

Instructions: Type any positive integer in the range 0 to 2147483647. Values are in

milliseconds.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.24

Parameter: Packaging Threshold

Default: 20 percent of the TCP window size

Range: 0 to 100 percent (0 indicates no delay)

Function: Speciﬁes the percentage of the DLSw TCP window that must be in use if

DLSw is to delay sending a package (one that is currently being built).

Instructions: Type a value in the range 0 to 100 percent. A value of 20 percent indicates

that if 20 percent of the TCP window size is being used, DLSw issues the

delay, as speciﬁed by the Packaging Timeout parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.1.25

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 203 204

Keine Kommentare

Avaya Configuring DLSw Services Bedienungsanleitung Seite 112