Avaya Configuring DLSw Services Bedienungsanleitung PDF herunterladen (Seite 117)

Editing DLSw Parameters

5-17

2. Click on Values and select Enable or Disable.

3. If you are editing an SDLC circuit, edit the Mode parameter by clicking

on Values and selecting Primary or Secondary for the type of SDLC link

station in this conﬁguration.

4. Click on OK.

This closes the Edit DLSw Interface window, and the Circuit Deﬁnition

window reappears (Figure 5-6).

5. Select File➔Exit.

The result of Step 5 depends on how you originally accessed the DLSw Interface

Enable parameter:

• If you selected Circuits➔Edit Circuits from the Conﬁguration Manager

window, the Circuit List window appears (refer to Figure 5-4). Clicking on

Done in the Circuit List window completes the procedure and returns you to

the Conﬁguration Manager window.

• If you selected a connector to invoke the Edit Connector window

(refer to Figure 5-5), the Conﬁguration Manager window appears, indicating

that you completed the procedure.

Editing DLSw Peer IP Table Parameters

The DLSw Peer IP Table contains the list of all conﬁgured (remote) peers known

to the local router. This section describes how to add, edit, and delete conﬁgured

peers. (Refer to Chapter 3 for more information on conﬁgured and unconﬁgured

peers.)

To access the DLSw Peer IP Table, begin at the Conﬁguration Manager window

(refer to Figure 5-1)and select Protocols➔DLSw➔Peer IP Table. The DLSw Peer

Conﬁguration window appears, listing all DLSw conﬁgured peers known to the

local router (Figure 5-8).

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 203 204

Keine Kommentare

Avaya Configuring DLSw Services Bedienungsanleitung Seite 117