Avaya Configuring DLSw Services Bedienungsanleitung PDF herunterladen (Seite 119)

Editing DLSw Parameters

5-19

2. Type a value for the Peer IP Address parameter.

Figure 5-9. IP Address in DLSw Peer Conﬁguration Window

Click on OK.

This saves the new entry. The DLSw Peer Conﬁguration window reappears

(refer to Figure 5-8) with the new entry in the list of existing peers.

4. Click on Done.

The Conﬁguration Manager window reappears.

Parameter: Peer IP Address

Default: None

Options: Any valid, 32-bit IP address in the form network.host (using dotted

decimal notation)

Function: Speciﬁes the IP address of a remote DLSw peer. Adding this address to

the DLSw IP Peer Table deﬁnes a conﬁgured peer to the local router.

Conﬁgured peers receive all DLSw-related broadcast frames from the

local router.

Instructions: Type the IP address at which the conﬁgured peer should receive all

DLSw-related broadcast frames.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.5.1.3

Note: Do not enter the IP address of any DLSw peer (slot) that resides in the

local router.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 203 204

Keine Kommentare

Avaya Configuring DLSw Services Bedienungsanleitung Seite 119