
Configuring DLSw Services
4-20
Parameter: IDBLOCK
Default: None
Options: 017 | 061 | any other 3-digit hexadecimal value
Function: Specifies the block number, which must match the host’s IDBLOCK
parameter value that identifies incoming connection requests. This
parameter is used with the PU Type, IDNUM, and XID Format
parameters to determine the station exchange identification (XID) value.
Instructions: Obtain the configured value at the host (from VTAM or other host
operating system) for this device. In most cases:
— Enter 017 for a 3174 in T2.0 mode.
— Enter 061 for a T2.0 node in fixed format.
MIB Object ID: N/A
Parameter: IDNUM
Default: None
Options: Any 5-digit hexadecimal value from 00000 to FFFFF (for T2.0 nodes)
Function: Specifies the ID number, which must match the host’s IDNUM parameter
value that identifies incoming connection requests. This parameter is used
with the PU Type, IDBLOCK, and XID Format parameters to determine
the station exchange identification (XID) value.
Instructions: Obtain the configured value at the host (from VTAM or other host
operating system) for this device. Enter a 5-digit hexadecimal value from
00000 to FFFFF for T2.0 nodes.
MIB Object ID: N/A
Kommentare zu diesen Handbüchern