Avaya Configuring MPOA Services Bedienungsanleitung PDF herunterladen (Seite 101)

Site Manager Parameters

309249-14.00 Rev 00

A-15

Parameter: Client Hold Time

Path: Configuration Manager > Protocols > IP > NHRP > NhrpNetTable

Default: 30

Options: 10 to 200

Function: Specifies the length of time, in seconds, during which client information is

valid.

Instructions: In most configurations, accept the default value. To ensure that you always have

recent client information, specify a low value. Such a low value, however, will

cause additional network traffic, because more frequent NHRP registration

requests result. If you specify a higher value, network traffic will decrease at the

expense of less current cache information. If using other than default values,

ensure that this value is greater than the value of the Client Reg Interval

parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.23.1.1.7

Back to “Accessing NHRP Client and Server Global Parameters” on page 4-2.

Parameter: Client Request Timeout

Path: Configuration Manager > Protocols > IP > NHRP > NhrpNetTable

Default: 3

Options: 1 to 100

Function: Specifies the maximum amount of time that the NHRP client waits to receive a

reply from an NHRP server.

Instructions: In most configurations, accept the default value. If using other than the default

value, specify a value large enough to account for propagation delays between

the NHRP client and remote NHRP servers, as well as any other typical

processing delays.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.23.1.1.8

Back to “Accessing NHRP Client and Server Global Parameters” on page 4-2.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 147 148

Keine Kommentare

Avaya Configuring MPOA Services Bedienungsanleitung Seite 101